Trải Nghiệm Nổ Hũ Tại 58win

iglidur® J200 | Specifically for aluminium shafts
iglidur® J200 is the result of the development of particularly low-friction plain bearings. When using plain bearings in linear motion, friction can be critical. Many materials can give low coefficients of friction under high loads, but this material can give excellent coefficients of friction even at low loads.

Typical applications

Vending machinery

Find more applications here:
Industry solutions
 

When to use it? For applications with anodised shafts When lowest coefficient of friction is required When long service life at low loads is required

When not to use it? When steel shafts are provided iglidur® J, sleeve bearing, mm iglidur® W300, sleeve bearing, mm When continuous operating temperatures are higher than +90°C iglidur® V400, sleeve bearing, mm When a cost-effective universal bearing is sought iglidur® G, sleeve bearing, mm iglidur® P, sleeve bearing, mm

Use our filter options to find the suitable product 

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods

Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are reliably avoided.
iglidur® - assembling, gluing, machining